Connectra multi-socket block 3-way 10m 3x2.5

Connectra 3-Way Socket Block – Indestructible Power Supply for Construction Sites

Do you need a distribution point on the construction site that can really take a beating? This Connectra socket block is made of impact-resistant nylon and designed for heavy-duty work. Whether you are working with heavy machinery or want to connect multiple devices at the same time, this block will not let you down.

This 3-way socket block is fully wired and equipped with a 10-meter-long neoprene cable (H07RN-F) with a generous 3G 2.5 mm² wire gauge. This means that even at a maximum load of 3680 Watts, you will experience hardly any voltage drop, ensuring that your tools always run at full power. Thanks to the red neon voltage indicator, you can see at a glance whether there is power to the block.

The block is not only strong but also practical. The three self-closing hinged covers protect the socket outlets against dust and splashes (IP44), which is essential in a rough working environment. With the four external mounting holes, you can optionally mount the block on a wall or workbench. The sturdy cable gland and strain relief ensure that the cable is securely fastened, no matter how often you pull or drag it.

• Impact-Resistant Nylon: An extremely strong housing that is resistant to drops and impacts.
• Optimal Conductivity: 10 meters of 3G 2.5 mm² cable for minimal resistance under heavy load.
• Clear Control: Red neon indicator immediately shows whether voltage is present.
• Splash-Proof (IP44): Equipped with self-closing hinged covers against moisture and dirt.
• Heavy-Duty Load Capacity: Suitable for equipment up to 3680 Watts.

Reliability in Every Square Meter

Equipped with a robust 2P+A contact plug that fits perfectly into any professional socket.

Use the four external holes to securely fix the block at your temporary workplace.

The H07RN-F neoprene jacket remains flexible and is resistant to mechanical stress.

• Construction Site: Central point for drilling, sawing, and sanding.
• Events: Safe power distribution for temporary installations.
• Workshop: Extension of your fixed connection points on the workbench.

• Number of Socket Outlets: 3 x Schuko
• Cable Gauge: 3G 2.5 mm²
• Length: 10 meters
• Material: Nylon / Neoprene

• Indicator Check: Always check the red neon lamp before you start; if it does not light up, the problem is likely with the main power supply.
• Cleaning: Keep the hinged covers free of sand and grit so that they always close properly and the IP44 protection is maintained.
• Positioning: Preferably place the block in a dry, elevated location to prevent it from sitting in a puddle of water when it rains.
• Maximum Power: Thanks to the 2.5 mm² wires, you can safely use this block for heavy devices such as compressors or large heaters.