Cebar rapid-setting cement 6 kg bucket

Fast-setting cement for masonry and concrete repairs.

Scope
Suitable for masonry and concrete repairs.
Suitable for, among other applications, pointing, fixing bolts, hooks and screws, and repairing leaks in masonry and concrete.

Properties
Very fast

Application conditions:
Apply only at temperatures between +5ºC and +25ºC.

Personal protection:
Wear gloves and safety glasses.

Surface requirements:
The substrate must be sufficiently solid, clean and free from grease.
Remove loose parts.

Surface preparation:
Lightly moisten dry substrates.

Tools:
Float, trowel, putty knife.

Directions for use:
Mix 3 parts Fast-Setting Cement with 1 part water to form a firm, homogeneous paste.
Apply the paste immediately (within one minute) using a float, trowel or putty knife.
Close the packaging tightly immediately after use.

Stains/residues:
Remove wet Fast-Setting Cement residues immediately with water.
Hardened Fast-Setting Cement residues can only be removed mechanically.

Points to note:
At low temperatures, curing can be accelerated by using lukewarm or warm water.
For larger repairs, make a mixture of Fast-Setting Cement, water and fine sand.