Tec7 Remove All

Tec7 Remove All – Cleaner for stubborn chemical contamination

Deep-penetrating softening agent that breaks the adhesion of contamination. Ideal for cured PUR foam, sealant and adhesive residues, graffiti, paint/varnish and soot deposits.

• Breaks the adhesion to the substrate – old paint layers and cured sealant come loose
• Extremely slow evaporating for complete removal of difficult contamination
• Environmentally friendly and easy to use
• Fire-safe for removing very stubborn surface contamination

Key features

Softens cured PUR, adhesive and sealant residues and loosens paint layers/graffiti for easy removal.

Remains active for a long time so that even very difficult contamination can be fully addressed.

Always test for resistance first. Extra careful on lacquered/powder-coated surfaces, laminate/veneer and printed substrates.

Cured PUR foam · sealant/adhesive residues · graffiti · paint/varnish · soot deposits.

Break adhesion and soften contamination; afterwards easily remove mechanically and rinse.

Little to no effect on pure silicones and very old, thick paint layers.

• Always test the substrate for resistance first.
• Cut away as much contamination as possible (PUR/sealant) and lightly sand the top layer/graffiti for faster penetration.
• Remove dust and dirt, apply sufficient Remove All and let work (depending on the degree of contamination).
• Remove softened contamination. Repeat if necessary.
• Always rinse abundantly with pure water.

Extra careful on lacquered/powder-coated surfaces, laminate, veneer and other glued top layers, and on printed/printed materials. This softening agent is not a paint stripper: for certain applications, more working time is required.

Base: acetal solvent (2,5,7,10-tetraoxaundecane)

Form: liquid

Color: transparent

Molecular weight: 164.2 g/mol

Melting point: < −65 °C

Initial boiling point: +210 °C

Density (20 °C): 0.9921

Vapour pressure (20 °C): 1.1225 bar

Solubility in water: 100 %

Flash point: 92 °C (ASTM D92) · 88 °C (ASTM D93)

Autoignition: +210 °C

Evaporation rate: 17.38 (Butyl acetate=1)

Shelf life: 18 months, in closed original packaging, dry, cool and frost-free

Step 1: Test the substrate; remove contamination mechanically as much as possible.

Step 2: (If possible) lightly sand paint layers/graffiti to speed up penetration; remove dust.

Step 3: Apply sufficient Remove All and let work (time depending on contamination/substrate).

Step 4: Remove softened contamination; repeat the process if necessary.

Step 5: Always rinse abundantly with clean water.

Little to no result on pure silicones and very old, thick paint layers.

Remove All – tube 50 ml (493905000)

General: Environmentally friendly, easy to use. At temperatures > flash point, only use spark-free/explosion-proof equipment. Keep away from heat/flames.

Storage: Store in original, well-closed packaging, dry/cool/frost-free and preferably in the dark. Keep out of reach of children. Consult the safety data sheet.