Antifouling Paint Kit 10cm 4-piece

Antifouling Paint Kit 10cm 4-piece – All-in-one for your boat maintenance

With the Antifouling Paint Kit you get all the essentials in one go for a smooth protective layer below the waterline. This complete 4-piece set is carefully assembled to make applying antifouling and other aggressive coatings as easy as possible.

The core of this set is the SAM 10 cm nylon roller with a pile height of 13 mm. This roller is specifically chosen because nylon is highly resistant to the strong solvents often found in antifouling and 2-component systems. Thanks to the 13 mm pile height, the roller picks up enough material to apply a good, covering layer even on less smooth surfaces.

In addition to the specialist roller, the set contains a suitable paint bracket, a sturdy paint tray and a stirring stick to mix your paint thoroughly before starting. Whether you are completely tackling a small boat or just touching up the waterline; with this set you can get started immediately and professionally.

• Complete Convenience Kit: Start immediately with all the basic essentials in one package.
• Solvent Resistant: The nylon roller is specially developed for aggressive boat paints.
• Good Layer Thickness: The 13 mm pile ensures excellent coverage and protection.
• Compact Size: With a width of 10 cm you have maximum control, even in difficult places near the keel or rudder.
• Efficient Preparation: Includes a stirring stick to thoroughly mix out any settling in the antifouling.

Everything you need for a smooth result

A 10 cm roller that does not swell or fall apart when in contact with strong solvents.

Just big enough for the 10 cm roller, convenient to use on the ladder or under the boat.

Fits well in the hand and ensures an even pressure distribution during rolling.

• 1x SAM 13mm pile 10cm Nylon Roller
• 1x Paint Bracket (suitable for 10 cm rollers)
• 1x Small Paint Tray
• 1x Wooden Stirring Stick

• Antifouling: For protecting the hull below the waterline.
• 2-Component: Ideal for epoxy primers and strong topcoats.
• Solvent-Based: For all paints with an aggressive base.

• Mixing: Use the stirring stick thoroughly. Antifouling often contains heavy components that sink to the bottom; mixing well is crucial for the performance.
• Lint-Free: Roll the nylon roller over a piece of tape before use to remove any loose fibers.
• Cleaning: When using antifouling or 2K paints, the roller is often no longer salvageable after use. Throw it away after the job for a fresh set next time.
• Safety: Always wear gloves when working with antifouling and preferably work in a well-ventilated room or outdoors.